-40%
Lift 3" Front 2" Rear Leveling Kit Fits Chevy Avalanche 1500 GMC Yukon Cadillac
$ 36.97
- Description
- Size Guide
Description
Fitment: (Please check your vehicle compatibility before buying)2002-2006 Cadillac Escalade - 2WD 4WD
2002-2006 Chevrolet Avalanche 1500 2WD 4WD (6-Lug)
2000-2006 Chevrolet Suburban 1500 4WD (6-Lug)
2000-2006 Chevrolet Tahoe - 2WD 4WD
2000-2006 GMC Yukon 1500 2WD 4WD (6-Lug)
Will Not Fit Models With Air-Suspension
6 Lug Models With Torsion Bar Suspension Only.
Description:
Lift 3" Front 2" Rear Leveling Kit Fits Chevy Avalanche 1500 GMC Yukon Cadillac
Fitment
:
(Please check your vehicle compatibility before buying)
2002-2006 Cadillac Escalade - 2WD 4WD
2002-2006 Chevrolet Avalanche 1500 2WD 4WD (6-Lug)
2000-2006 Chevrolet Suburban 1500 4WD (6-Lug)
2000-2006 Chevrolet Tahoe - 2WD 4WD
2000-2006 GMC Yukon 1500 2WD 4WD (6-Lug)
Will Not Fit Models With Air-Suspension
6 Lug Models With Torsion Bar Suspension Only.
Description:
Designed to Lift the Front of your vehicle by 1-3" (1-3inch), the rear by 2" (2.0inch)
Made from 1/4" Thick Heat Treated Steel and Billet Aluminum
Seamless Steel Tubing ensures it will last you a lifetime
Electrophoretic Coating Process adds superior rust prevention
These spacers will never decrease in height over time
Designed to be compatible with stock / OE / factory shocks
Benefits of the Leveling kit?
A body lift utilizes blocks and spacers to lift the body higher onto the frame of the vehicle without altering any of the suspension geometry.
With a body lift kit, your ground clearance remains unchanged, but the extra height allows you to run larger wheels and tires.
Block off your rear tires and make sure your vehicle is parked with the emergency brake on. Use a hydraulic jack (jacks from spare tire kits won’t be sufficient) and jack stands to lift your front two wheels off the ground. Refer to your owner’s manual for the correct jacking points to safely lift the vehicle.
Support with jack stands on the frame of the vehicle – do not rely on the jack to hold the weight of the vehicle while you work.
You’re going to want to take the pressure off the suspension and torsion bars. You can use either a sturdy G clamp, like this one from X, or one of these torsion bar removal tools. Attach it to the cross member and tighten so that it presses on your torsion bar keys.
1、Remove the retaining plates by removing the adjusting bolts.
2、Remove your clamp or torsion bar removal tool.
3、Your torsion bar key may fall out easily at this point. Many times the keys can be stuck and will present a challenge to remove. At that point, a sledge hammer and PB Blaster will be your friend as it may take a bit of persuasion to remove the keys. In some extreme cases the keys may need to be cut free from the torsion bars with a torch. This should be left to professionals.
4、You may want to mark on the cross member the exact position to help put in the new key.
5、Once the old keys are out, you’ll be able to see that there’s a difference in angle between the old and new keys, which is how you’ll get the lift. Insert the new torsion bar key.
6、You’re basically going to work backwards now. Re-clamp the key and the cross member. Replace the retaining plates and secure with adjusting bolts.
7、Repeat steps 2-7 on the other side.
8、Make sure that all parts are securely tightened. Ensure all fasteners are tightened to OEM spec or the specs provided in the installation instructions for your kit.
9、Lower your vehicle back down to the ground.
Item Specifics
Manufacturer Part Number :
CCI835916YU
Brand :
CCIYU
Placement on Vehicle :
Left
Policy :
Buys wrong item or change mind,shipping need pay by buyer
Packing :
4 Pcs Leveling Kit
Color :
black
Lift Front :
1-3 inch
Lift Rear :
2 inch
Lift Height :
1"-3" Front & 2" Rear
Condition :
New
Interchange Part Number :
Chevrolet Avalanche 1500 / Suburban 1500 4WD
Other Part Number :
Lift Front 1-3 inch; Rear 2 inch
Fitment Type :
Direct Replacement
Warranty :
1 Year
Adjustable :
Yes (Front)
Type :
Torsion Keys
Part Type :
Suspension Lift Kit
Greasable or Sealed :
Sealed
Material :
Carbon Steel
Ship from :
Ontario, California
Custom Bundle :
No
Modified Item :
No
Payment
1.
We accept multiple payment methods, such as PayPal, VISA, etc.
.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
Shipping
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. The images shown are not the actual item and are for your reference only.
4. Fast shipping:All our packages use USPS First Class Package Service
5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns
1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
Feedback
1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
2. It is impossible to address issues if we do not know about them!
Warranty
1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
You agree to all of the above-listed policies upon bidding on and winning this auction!
Picture
New List Item
Power Fold Power Heated Signal Pair Mirrors For 2016-18 Toyota Auris/Corolla IM
USD 152.96
HVAC Heater Blower Motor With Resistor Kit Fits 95-99 GMC C2500 K2500 Suburban
USD 59.99
Suspenison Kit 8Pcs Ball Joints Tie Rod End Links New Front For 2003-2007 Dodge
USD 172.08
Air Fuel Ratio O2 Sensor Oxygen for Toyota 4Runner 3.4L 99-00 Up+Downstream X2
USD 43.51
For Jeep Wrangler Chrysler PT Cruiser 2007-2017 Remote Keyless Entry Key Fob
USD 9.89
Weekly Special Sell
Shop Category
Store Home
shock strut
Ignition Coil
Exterior Light Bulbs
Door Handle
Blower Motor Resistor
wheel hub bearing
wheel lug nuts
remote key
Cylinder Head Gasket Sets
Cylinder Piston Gasket Sets
Brake Pads & Rotors
◈ Brake Rotors
◈ Brake Pads
◈ Brake Rotors and Pads
◈ Brake Calipers
◈ Brake Calipers & Rotors Pads
◈ Brake Calipers & Pads
Towing Mirrors
wheel Spacers
Leveling Lift Kit
Fuel Pumps
AC Compressor
Starter
Air Suspension
Oxygen Sensor
Radiator & Condenser
coilover
Alternators
Fastener
Complete Struts
Window Switch
Mass Air Flow Sensor
Window Regulator
Headlight Assenbly
Fuel Injectors
CV axle
suspension kit
◈ Suspension
◈ suspension cj
◈ suspension gxy
◈ suspension fu
Lift Support
License Plate Frames
Car Tools
Car seat cover
Car cover
Windshield Wiper Motor
Thermostat Housing
Radiator Coolant Tank
Timing Chain Kits
Timing Belt Kits
Water Pumps
UTV & ATV Brake System Parts
◈ Brake Shoes
Door Lock Actuator
Power Steering Pump
Variable Timing Solenoid (VVT)
Valve Cover
Fuel Tank Pipe
Oil Pump
Tire pressure sensor
Strut Tie Bar
Throttle Body
Harmonic Balancer
Oil Pan
Motorcycle Carburetor & Parts
HVAC
ATV Rear Wheel Axle
Car Antenna
ABS Wheel Speed Sensor
Spoilers & Wings
Regulator Rectifier
Oil Cooler
Starter Relay
Purge Valve
Knock Sensor
Turbocharger
Vacuum Pump
Parking sensor
Detection tools
Crankshaft Position Sensor
Camshaft Position Sensor
MAP Sensor
Oil Pressure Sensor
Throttle Position Sensor
Stator
idle air control valve
Running Board Motor
Transfer Case Shift Motor
Secondary Air Injection Pump
Clutch Slave Cylinder
Consoles & Parts;
Roof Rack
Tire Pressure Gauge
Steering Rack
Ball Joint
Spark Plug Ignition Wire
Engine Mount
Glow Plug
Air Cleaner Filter Box
window visor
Pressure Tester Gauge
Jack Stands
Wheel Lug
Sun Visor
Wiring harness
Trim tilt motor
ATV Brake Caliper
ignition distributor
Car Carburetor
Heater Control Valve
Crankcase Vent Valve
Horns
Steering U-Joint
Brake Pad Sensor
Fuel Shut Off Solenoid
Height Level Sensor
Temperature Sensor
Driveshaft
Cylinder Piston Kit
Ballast module
Rubber Seal Strip
nerf bars
ATV Brake Master Cylinder
4WD Actuator
Trailer Adapter
Oil Filter Wrench
Oil Fuel Hose Line
Jeep
Dipstick
Air horn
brake Hose Line
LED headlight Assembly
headlight motorcycle
Foot Rest Pedals
O Rings
Fuel Injector Wiring Harness
A/C Expansion Valve
Wheel Stem Air Valve Cap
water Pump Impeller
Rocker Arm
Hydraulic Lifter&Roller Lifter
Splash Guards & Mud Flaps
Heater Cores
Evaporators
Cooling fan & fan clutch
vehicle speed sensor
Sensor-8
CV axle+Brake Pads/Rotors
Steering Shaft
Hydraulic Hand Brake
CDI BOX
Proportioning Valve
Alternator Bracket Kit
Strut Mount
Strut+Suspension+Hub bearing
Air Ride Suspension Valve
Window Glass Hinge
Other Golf Cart Parts
Home & Garden
◈ Portable Fans
Intercoolers
Crankshaft Pulley
4 pcs wheel hub bearing
Brake Drum And Brake Shoes
◈ Brake Drum And Brake Shoes
◈ Brake Drum
◈ Brake Shoes
Brake Line Lock Kit
Fender Flares
jumper cable
Tonneau Cover
ATV Tires
Brake Line Tubing
Bumpers & Parts
Body Kits
dash cover
Brake Rotor&Pad&Bearing
air vent
Other Handlebars & Levers
Windshields
Lower Kits & Parts
Cargo Cover
Leaf Springs
Brake Shoes
Other Motorcycle Parts
Hub Caps
ATV Ignition Switch
fog lights
Motorcycle Brake Clutch Lever
Door Hinge Conversion Kits
Pillar Posts
Fuse Holder Box
Windshield Outer Trim
Ballast Module
Jack Plate
Power Brake Booster
Brake Pads & Drum Shoes
Brake Rotors Pads & Drum Shoe
Radiator Support
winch
Hot Stapler
A-Arms
Fuel Valve& Petcocks
AC Compressor Control Valve
Jeep Wrangler
Wheel Hub Bearing Knuckle
leveling kit + struts shocks
Dash Cover
Tensioner
Bug Shield
Wheel Rim
Lights
◈ Side/Cab Marker Lights
◈ Instrument Panel Lights
◈ Third Brake Lights
◈ Interior Lights
◈ Exterior Lights
◈ Led Headlights
◈ Special Model Lights
Other
Hot Item
4x Chrome Door Handles for Chevy Tahoe GMC Yukon Sierra Denali 07-13 Left Right
USD 31.29
Front Or Rear Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Buick 513121
USD 40.73
10pcs Blue T10 194 168 LED Bulbs Instrument Gauge Cluster Dash Light W/ Sockets
USD 8.69
10x Super White T10 194 LED Bulbs Instrument Gauge Cluster Dash Light W/ Sockets
USD 8.99
2PC NEW H1 6000K Super White 55W CREE LED Headlight Bulbs Kit Fog Driving Light
USD 8.79
Lift 3" Front 2" Rear Leveling Kit Fits Chevy Avalanche 1500 GMC Yukon Cadillac
Fitment
:
(Please check your vehicle compatibility before buying)
2002-2006 Cadillac Escalade - 2WD 4WD
2002-2006 Chevrolet Avalanche 1500 2WD 4WD (6-Lug)
2000-2006 Chevrolet Suburban 1500 4WD (6-Lug)
2000-2006 Chevrolet Tahoe - 2WD 4WD
2000-2006 GMC Yukon 1500 2WD 4WD (6-Lug)
Will Not Fit Models With Air-Suspension
6 Lug Models With Torsion Bar Suspension Only.
Description:
Designed to Lift the Front of your vehicle by 1-3" (1-3inch), the rear by 2" (2.0inch)
Made from 1/4" Thick Heat Treated Steel and Billet Aluminum
Seamless Steel Tubing ensures it will last you a lifetime
Electrophoretic Coating Process adds superior rust prevention
These spacers will never decrease in height over time
Designed to be compatible with stock / OE / factory shocks
Benefits of the Leveling kit?
A body lift utilizes blocks and spacers to lift the body higher onto the frame of the vehicle without altering any of the suspension geometry.
With a body lift kit, your ground clearance remains unchanged, but the extra height allows you to run larger wheels and tires.
Block off your rear tires and make sure your vehicle is parked with the emergency brake on. Use a hydraulic jack (jacks from spare tire kits won’t be sufficient) and jack stands to lift your front two wheels off the ground. Refer to your owner’s manual for the correct jacking points to safely lift the vehicle.
Support with jack stands on the frame of the vehicle – do not rely on the jack to hold the weight of the vehicle while you work.
You’re going to want to take the pressure off the suspension and torsion bars. You can use either a sturdy G clamp, like this one from X, or one of these torsion bar removal tools. Attach it to the cross member and tighten so that it presses on your torsion bar keys.
1、Remove the retaining plates by removing the adjusting bolts.
2、Remove your clamp or torsion bar removal tool.
3、Your torsion bar key may fall out easily at this point. Many times the keys can be stuck and will present a challenge to remove. At that point, a sledge hammer and PB Blaster will be your friend as it may take a bit of persuasion to remove the keys. In some extreme cases the keys may need to be cut free from the torsion bars with a torch. This should be left to professionals.
4、You may want to mark on the cross member the exact position to help put in the new key.
5、Once the old keys are out, you’ll be able to see that there’s a difference in angle between the old and new keys, which is how you’ll get the lift. Insert the new torsion bar key.
6、You’re basically going to work backwards now. Re-clamp the key and the cross member. Replace the retaining plates and secure with adjusting bolts.
7、Repeat steps 2-7 on the other side.
8、Make sure that all parts are securely tightened. Ensure all fasteners are tightened to OEM spec or the specs provided in the installation instructions for your kit.
9、Lower your vehicle back down to the ground.
Item Specifics
Manufacturer Part Number :
CCI835916YU
Brand :
CCIYU
Placement on Vehicle :
Left
Policy :
Buys wrong item or change mind,shipping need pay by buyer
Packing :
4 Pcs Leveling Kit
Color :
black
Lift Front :
1-3 inch
Lift Rear :
2 inch
Lift Height :
1"-3" Front & 2" Rear
Condition :
New
Interchange Part Number :
Chevrolet Avalanche 1500 / Suburban 1500 4WD
Other Part Number :
Lift Front 1-3 inch; Rear 2 inch
Fitment Type :
Direct Replacement
Warranty :
1 Year
Adjustable :
Yes (Front)
Type :
Torsion Keys
Part Type :
Suspension Lift Kit
Greasable or Sealed :
Sealed
Material :
Carbon Steel
Ship from :
Ontario, California
Custom Bundle :
No
Modified Item :
No
Payment
Shipping
Returns
Feedback
Warranty
1.
We accept multiple payment methods, such as PayPal, VISA, etc.
.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. The images shown are not the actual item and are for your reference only.
4. Fast shipping:All our packages use USPS First Class Package Service
5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
2. It is impossible to address issues if we do not know about them!
1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
You agree to all of the above-listed policies upon bidding on and winning this auction!