LEE 90585 * LEE PRECISION POWDER THROUGH EXPANDING DIE * 45 ACP * 90585

Description

SAME DAY SHIPPING
ORDER BEFORE 1:00 PM (EST)
INCLUDING SATURDAY
WE SELL REPLACEMENT PINS/MANDRELS
FOR ALL OF LEE'S DIES AND DIE SETS
THIS ITEM SHIPS
"FREE"
ALL MANUFACTURER WARRANTIES APPLY
NEW!
IN ORIGINAL PACKAGING
90585 * LEE POWDER THROUGH EXPANDING DIE
45 ACP * 45 AUTO RIM
THIS DIE HAS THE
"NEW" "SPLINE DRIVE"
LOCK DOWN RING
Only Lee dies permit charging the case while expanding the case mouth. Every Lee 3-die Set includes the Powder Through Expanding Die at no extra cost. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded.
Used with powder funnel adapter or the Auto Disk or Pro Auto Disk Powder Measure
USE WITH:
POWDER FUNNEL ADAPTER OR
LEE
AUTO DISK
OR
PRO AUTO DISK
POWDER MEASURE
SHELL HOLDERS SOLD SEPARATELY
THIS DIE HAS
"STANDARD THREADS"
:
STANDARD THREADS ARE
"7/8"-14 THREAD".
"MOST"
MANUFACTURES PRESSES ACCEPT "STANDARD THREAD DIES", (RCBS,LYMAN,PACIFIC,REDDING ETC).
THERE ARE SOME PRESSES THAT
"
DO NOT ACCEPT STANDARD THREADS"
(SOME "DILLION" AND OTHER PRESSES).
"CHECK YOUR PRESS"
TO MAKE SURE IT HAS "STANDARD THREADS"
CAUTION!
Ammunition reloading can be dangerous if done improperly and should not be attempted by persons not willing and able to read and follow instructions exactly. Children should not be permitted to reload ammunition without strict parental supervision. Always wear safety glasses when reloading and shooting. Ammunition loaded with these tools and data should only be used in modern guns in good condition. We do not accept responsibility for ammunition loaded with these tools or data as we have no control over the manufacture and storage of components or the loading procedure and techniques. Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
WARNING:
Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer.
WARNING:
Handling lead objects may expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer
WARNING:
Steel parts in this product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. T
o prevent exposure, do not alter the product by welding, grinding, etc.
FOR SAFETY, TRIM YOUR BRASS
BELOW ARE A FEW TOOLS YOU MIGHT CONSIDER WHEN PURCHASING
"QUICK TRIM DIES"
LEE 90437 * DELUXE QUICK TRIM CASE TRIMMER
WITH A
"RIFLE" or "PISTOL"
"QUICK TRIM DIE"
, YOU WILL BE ABLE TO QUICKLY AND PRECISELY TRIM
YOUR BRASS TO THE CORRECT LENGTH AND SIMULTANEOUSLY
"CAMFER"
THE INSIDE AND OUTSIDE
OF THE CASE MOUTH. NO CALIPERS, MEASUREMENT OR ADJUSTMENT REQUIRED. SIMPLY INSTALL THE
APPROPRIATE QUICK TRIM DIE IN YOUR PRESS AND START TRIMMING. A CLICK ADJUSTMENT STOP
ALLOWS THE TRIM LENGTH IN
".001 OF AN INCH INCREMENTS"
ALSO ALLOWS THE USER TO
"SHORTEN"
THE CASE TO A UNIFORM SHORTER LENGTH THAN STANDARD, REDUCING TRIMMING FREQUENCY.
"INCLUDES SNAP ON CHIP CATCHER"
LEE 90670 * DELUXE POWER QUICK TRIM
"ULTIMATE IN CASE TRIMMING SPEED and CONVENIENCE"
TRIM, CHAMFER and DEBURR THE INSIDE and OUTSIDE OF CASE NECKS IN A MATTER OF SECONDS.
HEX SHANK SNAPS INTO CORDLESS DRILL or SCREWDRIVER (sold separately).
INCLUDES:
POWER QUICK TRIM ADAPTER, CHIP CATCHER, and DELUXE CUTTER ASSEMBLY.
LEE 90740 * POWER QUICK TRIM STUD
"MOTORIZE YOUR QUICK TRIM"
THE POWER QUICK TRIM STUD ENABLES YOU TO
"MOTORIZE"
YOUR
"VALUE"
or
"DELUXE QUICK TRIM"
.
HEX SHANK SNAPS IN TO ANY INEXPENSIVE
CORDLESS DRILL or SCREWDRIVER (sold separately).
THIS TOOL ALSO REQUIRES A CARTRIDGE SPECIFIC QUICK TRIM DIE.
LEE 90386 * VALUE QUICK TRIM CASE TRIMMER
WITH YOUR QUICK TRIM DIE YOU WILL BE ABLE TO QUICKLY AND PRECISELY TRIM YOUR BRASS TO THE
CORRECT LENGTH WITH PRESS-MOUNTED CONVENIENCE. THE VALUE QUICK TRIM CASE TRIMMER QUICKLY
AND PRECISELY TRIMS YOUR BRASS TO THE CORRECT LENGTH. IF YOU ARE LOOKING FOR A TOOL THAT
ALSO CHAMFERS THE INSIDE and OUTSIDE OF THE CASE NECK WHILE SIMULTANEOUSLY TRIMMING
YOUR BRASS TO THE CORRECT LENGTH.
NO CALIPERS, MEASUREMENT OR ADJUSTMENT REQUIRED. SIMPLY INSTALL THE
APPROPRIATE QUICK TRIM DIE IN YOUR PRESS AND START TRIMMING. A CLICK ADJUSTMENT STOP
ALLOWS THE TRIM LENGTH IN
".001 OF AN INCH INCREMENTS"
ALSO ALLOWS THE USER TO
"SHORTEN"
THE CASE TO A UNIFORM SHORTER LENGTH THAN STANDARD, REDUCING TRIMMING FREQUENCY.
"INCLUDES SNAP ON CHIP CATCHER"
LEE 90355 * DELUXE CUTTER ASSEMBLY
DELUXE CUTTER ASSEMBLY IS FOR USE WITH THE "90386 * QUICK TRIM CASE TRIMMER"
PLEASE READ THIS CAREFULLY
ALL OUR ITEMS HAVE A 30 DAY RETURN POLICY
EMAIL US WITH QUESTIONS BEFORE YOU PURCHASE
WE ENCOURAGE YOU TO REVIEW MY FEEDBACK
WE ONLY ACCEPT PAYMENT THRU PAYPAL
SAME DAY SHIPPING
ORDER BEFORE 1:00 PM (EST)
INCLUDING SATURDAY
WE SELL REPLACEMENT PINS/MANDRELS
FOR ALL OF LEE'S DIES AND DIE SETS
THIS ITEM SHIPS
"FREE"
ALL MANUFACTURER WARRANTIES APPLY