Fits Toyota Tacoma 4WD 2005-2020 2" Front & 3" Rear Leveling Lift Kit Diff Drop

Description

Front Spacers:
After removing the wheel, remove any brake line and ABS line brackets, so you have enough slack in the lines.
Use a wrench to remove the upper strut mount nuts and the upper ball joint nut. Strike the side of knuckle with a hammer to get the ball joint to separate.
Using a wrench, remove the steering linkage nut.
Remove the sway bar nut and bushing.
Remove the two lower strut mount bolts and remove the strut from the vehicle.
Fits Toyota Tacoma 4WD 2005-2020 2" Front & 3" Rear Leveling Lift Kit Diff Drop
Front Spacers:
After removing the wheel, remove any brake line
and ABS line brackets, so you have enough slack
in the lines.
Use a wrench to remove the upper strut
mount nuts and the upper ball joint nut. Strike
the side of knuckle with a hammer to get the ball
joint to separate.
Using a wrench, remove the steering
linkage nut.
Remove the sway bar nut and bushing.
Remove the two lower strut mount bolts and remove the strut from the vehicle.
Install the supplied bolts into the leveling kit spacer.
These will act as the new studs when reinstalled.
Bolt the spacer to the top of the strut using the
supplied nuts.
Rotate the strut 180 degrees and install it back into the truck. Re-insert the lower strut bolts.
The lower mount bushing will rotate to correct the
angle.
Raise the lower control arm to raise the spindle while lowering the upper control arm to re-install the upper ball joint and Re-install the steering linkage.
Complete the installation on the other side of the truck before reinstalling the sway bar nut and bushings.
Rear Blocks:
Support the rear axle with a jack and jack stands.
Remove the brake and parking brake cables so there is slack in the lines.
Remove the lower rear shock mount nut and bolt.
Remove the factory rear U-bolts and discard them.
Lower the axle to remove the factory
block, or you can put new blocks on
the factory
block, get a new lift.
Install the new rear block making sure the smaller
side of the spacer is facing the front of the
truck.
Install the new supplied U-bolts and torque to
factory spec.
Complete the installation on the other side of the
truck before reinstalling any brake or ABS lines.
After 100 miles recheck torque to factory spec.
Drop Kit Installation:
1. Remove the skid plate from the bottom of the truck.
2. Using a floor jack support the differential.
3. Remove the factory M14 bolts. Make sure you save the OEM dome washers.
4. Lower the differential far enough to insert the drop spacers. The differential may need to be pulled
down to make enough room.
5. reinstall the differential using the new longer supplied bolts and nuts.
6. Reinstall the skid plate using the small new skid plate drop spacers and the new longer hardware.
7. Make sure to recheck the torque of all bolts once done.
Item Specifics
Brand
GDcarpartsin
Manufacturer Part Number
GD835931CAR
Placement on Vehicle
Left
Kit Parts Included
Strut Spacer
Included Hardware
Mounting Hardware
Lift Height
2" Front & 3" Rear
Thickness (Front)
26mm
Thickness (Rear)
76mm
Warranty
1 Year
OE Spec or Performance/Custom
Performance/Custom
Adjustable
No
Interchange Part Number
Fits Toyota Tacoma 4WD 2005-2020
Condition
New
Kit or Single Part
Kit
Ship from
Ontario, California
Color
Black
Other Part Number
Lift Front 2 inch; Rear 3 inch
Note
6 LUG MODELS ONLY, Not Recommended For Trd Off-Road Models
Part Type
Suspension Lift Kit
Fitment Type
Direct Replacement
Custom Bundle
No
Modified Item
No
Greasable or Sealed
Sealed
Shipping
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service
4. If you have not received your shipment within 15 days from payment , please contact!
Return
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer
Feedback
We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Payment
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
Warranty
1,We stand behind every product we sell.
2,All of our brand new items come with a 60-Days money-back guarantee.
3,We define the item as defective only if it doesn't function as described.
4,It is the buyer's responsibility to understand the item description before bidding.
5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
7,Shipping & handling cost are not refundable.
8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
9,No  product liability insurance is assumed.
Shop Category
Store Home
Mirror Parts
◈  Vehicle Mirrors
◈  Truck Mirrors
◈  Mirror Glasses & Other Parts
Brake Parts
◈  Brake Rotors
◈  Brake Pads
◈  Brake Rotors + Pads
Mass Air Flow Sensors
Oxygen Sensors
Cooling Parts
◈  Radiators
◈  Radiator Hoses
◈  Cooling Fans
◈  Fan Clutches
◈  Intercoolers
AC Condensers
Heater Cores
Evaporators
Wheel Hub Bearings
Wheel Spacers
Leveling Lift Kits
Wheel Lug Nuts
Knock Sensors
Fuel Cell Tanks
Jack Stands
A/C Expansion Valves
Air Cleaner Filter Boxes
Clutch Slave Cylinders
Steering U-Joints
Steering Shafts
suspension kit
◈  cj
Idle Air Control Valve
4 pcs wheel hub bearing
Fender Flares
ABS Speed Sensor
Vehicle Speed Sensor
Cargo Cover
Pillar Posts
Polisher
Fuse Holder Box
Radiator Support
Drop Spindle Lowering Kit
Tonneau Cover
Wheel Hub Bearing Knuckle
Bug Shield
Window Visor
Roof Rack
Engine Timing Chain Kit
Engine Timing Belt Kit
Engine Repair Kit
Other
Hot Item
Pair Side Mirrors For 2015-2020 Ford F-150 Black Power Heated Turn Signal Light
USD 152.95
(4) 2" Hubcentric Wheel Spacers 6x5.5 Fits Chevy Silverado Tahoe GMC Sierra 1500
USD 120.99
(4) 2" Hubcentric Wheel Spacers 5x5 Fits Jeep Wrangler JK Jeep Grand Cherokee
USD 99.99
(4) 2" Hubcentric 6x5.5 Wheel Spacers Fits Toyota 4Runner Tacoma Tundra Sequoia
USD 117.24
(4) 1.5" Hubcentric Wheel Spacers 6x5.5 Fits Toyota 4Runner Tacoma FJ Cruiser
USD 90.32
Delivery
New List Item
Aluminum Radiator For 2000-2006 Toyota Tundra w/ 4pcs 8-10mm 27-51mm Hose Clamps
USD 117.71
Suspension 8 x Ball Joints Inner Outer Tie Rods Sway Bars Kit Fits Nissan Altima
USD 54.17
2 Pcs Front Wheel Bearing Hub LH or RH Side 513357 For Nissan Qashqai?2017 2018
USD 79.87
Set Front Wheel hub LH or RH Side 513169 W/ABS For Jaguar S-Type 2000-08 5 Bolts
USD 95.13
Compatible With 2006-2010 Ford EXPLORER Driver+Passenger Side Mirrors Glass
USD 37.77
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Fits Toyota Tacoma 4WD 2005-2020 2" Front & 3" Rear Leveling Lift Kit Diff Drop
Front Spacers:
After removing the wheel, remove any brake line
and ABS line brackets, so you have enough slack
in the lines.
Use a wrench to remove the upper strut
mount nuts and the upper ball joint nut. Strike
the side of knuckle with a hammer to get the ball
joint to separate.
Using a wrench, remove the steering
linkage nut.
Remove the sway bar nut and bushing.
Remove the two lower strut mount bolts and remove the strut from the vehicle.
Install the supplied bolts into the leveling kit spacer.
These will act as the new studs when reinstalled.
Bolt the spacer to the top of the strut using the
supplied nuts.
Rotate the strut 180 degrees and install it back into the truck. Re-insert the lower strut bolts.
The lower mount bushing will rotate to correct the
angle.
Raise the lower control arm to raise the spindle while lowering the upper control arm to re-install the upper ball joint and Re-install the steering linkage.
Complete the installation on the other side of the truck before reinstalling the sway bar nut and bushings.
Rear Blocks:
Support the rear axle with a jack and jack stands.
Remove the brake and parking brake cables so there is slack in the lines.
Remove the lower rear shock mount nut and bolt.
Remove the factory rear U-bolts and discard them.
Lower the axle to remove the factory
block, or you can put new blocks on
the factory
block, get a new lift.
Install the new rear block making sure the smaller
side of the spacer is facing the front of the
truck.
Install the new supplied U-bolts and torque to
factory spec.
Complete the installation on the other side of the
truck before reinstalling any brake or ABS lines.
After 100 miles recheck torque to factory spec.
Drop Kit Installation:
1. Remove the skid plate from the bottom of the truck.
2. Using a floor jack support the differential.
3. Remove the factory M14 bolts. Make sure you save the OEM dome washers.
4. Lower the differential far enough to insert the drop spacers. The differential may need to be pulled
down to make enough room.
5. reinstall the differential using the new longer supplied bolts and nuts.
6. Reinstall the skid plate using the small new skid plate drop spacers and the new longer hardware.
7. Make sure to recheck the torque of all bolts once done.
Item Specifics
Brand :
GDcarpartsin
Manufacturer Part Number :
GD835931CAR
Placement on Vehicle :
Left
Kit Parts Included :
Strut Spacer
Included Hardware :
Mounting Hardware
Lift Height :
2" Front & 3" Rear
Thickness (Front) :
26mm
Thickness (Rear) :
76mm
Warranty :
1 Year
OE Spec or Performance/Custom :
Performance/Custom
Adjustable :
No
Interchange Part Number :
Fits Toyota Tacoma 4WD 2005-2020
Condition :
New
Kit or Single Part :
Kit
Ship from :
Ontario, California
Color :
Black
Other Part Number :
Lift Front 2 inch; Rear 3 inch
Note :
6 LUG MODELS ONLY, Not Recommended For Trd Off-Road Models
Part Type :
Suspension Lift Kit
Fitment Type :
Direct Replacement
Custom Bundle :
No
Modified Item :
No
Greasable or Sealed :
Sealed
Shipping
Return
Feedback
Payment
Warranty
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service
4. If you have not received your shipment within 15 days from payment , please contact!
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer
We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1,We stand behind every product we sell.
2,All of our brand new items come with a 60-Days money-back guarantee.
3,We define the item as defective only if it doesn't function as described.
4,It is the buyer's responsibility to understand the item description before bidding.
5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
7,Shipping & handling cost are not refundable.
8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
9,No  product liability insurance is assumed.
All rights reserved.