Caprice Extended Trailing Arms B Body Rear 71-96 Impala Donk Lift Box Chevy

Description

BUSHINGS SOLD SEPARATELY. This kit comes with 2 Upper Rear Trailing Arms, 2 Lower Rear Trailing Arms, an Installation Manual, and a Full Install DVD. These rear trailing arms fit a variety of applications based on the 71-96 GM B Body platform. For more information on the fitment applications for these rear trailing arms, check out the fitment guide table in the full description. When lifting the rear of a 71-96 B Body vehicle, the trailing arms become too short to work efficiently. UCL extended rear trailing arms will greatly improve the performance of your lifted car application and are a necessity when raising the rear. CLICK HERE TO VIEW THE FULL DESCRIPTION
Listing
Caprice extended trailing arms 71-96 Impala Donk lift Chevy Box adjustable
Kit Includes:
▶ 2 x Upper rear trailing arms
▶ 2 x Lower rear trailing arms
▶ Installation manual
▶ Full install DVD
SKU: RA-6050
CATEGORY:
Caprice Lift Kits for B Body
,
Extended Rear Trailing Arms
SHARE:
Caprice Extended Trailing Arms for your 71-96 B Body lift kit project
Are you planning on putting a lift in the rear of your 71-96 B Body? These Caprice Extended Trailing Arms fit all 71-96 Chevy B Body platform cars and are a necessity when lifting the rear of this car. These rear arms fit the following vehicles from 1971 to 1996: Chevy Impala, Chevy Caprice, 71-81 Chevy Belair, 71-72 Chevy Biscayne, 71-84 Buick Electra, 91-96 Buick Roadmaster, 71-85 Buick LeSabre, 71-73 Centurion, 71-79 Estate, 71-90 Estate Wagon, 71-72 Kingswood, 71-72 Townsman, 71-72 Brookwood, 71-91 Oldsmobile 88, Delta 88, Custom Cruiser, 71-89 Pontiac Safari, 71-81 Pontiac Bonneville, 71-81 Catalina, 77-86 Pontiac Parisienne, and 71-76 Pontiac Grandville. See fitment table below for a full list of applications.
The arms are a bolt-on design and are specifically designed for cars running lift springs or lift cups.
Why do I need longer Caprice Extended Trailing Arms when lifting my car?
When lifting the rear of 71-96 B Body vehicles, the trailing arms become too short to work efficiently. UCL extended rear trailing arms will solve many problems associated with running lift springs or lift cups such as the following:
● Drive shaft angle, also know as pinion angle, being out of alignment
● Excessive drive shaft vibrations
● Premature U joint failure, causing an unsafe driving condition
● Wheels moving forward into the wheel well and looking funny
Universal Car Lifts Caprice Extended Trailing Arms fit all 71-96 B Body platform vehicles. They will greatly improve the performance of your lifted car application and are a necessity when raising the rear. They will also improve the appearance of the car and get rid of the issues associated with the wheel moving forward. For this reason, we highly recommend running these arms when lifting your Caprice, Impala, Roadmaster, Delta 88, Bonneville, Parisienne, LeSabre or any other 71-96 Chevy B Body application.
How are UCL's Caprice Extended Trailing Arms different from others?
Our longer trailing arms are the most durable on the market and are rated for over 1000hp. Constructed from high grade steel that is precision machined to exacting tolerances, UCL arms are over-sized and over-built for maximum performance. Some features include:
● Massive 1-3/4" tubing construction is the largest in the industry to handle maximum abuse
● Arms are adjustable up to 3 inches over stock trailing arms
● Threaded adjustments allow you to fine tune your drive shaft angle to eliminate vibrations
● Upper and lower arms include high grade plated jam nuts for corrosion resistance
● UCL is the only manufacturer to construct the upper arms with reinforced boxed ends
● Precision machined bushing receivers for a guaranteed accurate bushing fit
● Welded by certified welders using state of the art equipment
● Finished in a durable gloss black powder coat finish for years of trouble free use
We are so confident our Caprice Extended Trailing Arms are the best that we offer a lifetime warranty against manufacturers defects. Rest assured that by purchasing UCL Caprice Extended Trailing Arms, you are purchasing the best car lift products in the world.
Durable gloss black powder coating lasts 100x longer than spray painted parts
When choosing Caprice Extended Trailing Arms for your car lift project, be sure to note the finish on the parts. All of Universal Car Lifts parts feature a durable gloss black powder coat finish. We start by cleaning the raw metal parts with a degreaser solution to facilitate a permanent finish bonding. The parts are then sent through a large oven and heated to encourage off gassing. This uniformly bakes off any impurities from the parts.
After pretreating the parts in an oven, the Caprice Extended Trailing Arms are professionally sprayed with a high end powder coat gun in a clean room spray booth. The arms are then sent back through the oven where they bake at the proper temperature to obtain a permanent bond.
This powder coat technique is the same method that new car manufacturers use to ensure their parts last virtually forever. It prevents rust from forming on the parts which will weaken the steel and cause premature failure.
Beware of "knock-off brand" sellers who use cheap hardware store spray paint to finish their parts. The finish will look like crap and the parts will almost immediately rust. The corrosion will eventually cause the parts to fail and could cause your rear end to fall out of your car.
Insist on genuine UCL Caprice Extended Trailing Arms for your project. We have been manufacturing car lifts longer than anyone else and have more cars running our lifts than anyone else.
Bushing options for your 71-96 Caprice Extended Trailing Arms
Like all car lift kits, you will need to install new bushings in to the trailing arms. You can try reusing your stock bushings, but chances are the 20+ year old factory units are in need of replacement. We provide the part numbers in the instructions and you can purchase these at your local auto parts store.
As an alternate option, we can supply the bushings for you.
Follow this link to purchase heavy duty bushings
designed for these arms.
You will need to use a hydraulic H press to install the bushings in the rear trailing arms. We recommend having an experienced professional do this. If you are interested in having us install the bushings for you, we can send you the trailing arms with them fully installed and ready to bolt on your ride. This includes all new bushings and professional installation. Most customers agree this is by far the easiest way to get your car up and rolling the fastest. If you are interested in this option, please contact us directly for more information and pricing.
We beat all competitors prices on identical products
UCL is the largest manufacturer of car lift products in the world. We are confident our products are the best quality at the best prices. If you find a better price on an identical product, we will gladly beat it. Contact us directly via message or phone for more information. UCL has lifted more cars than anyone else and was the first company to offer car lift kits. Our customers have been riding high on our products for over 15 years.
Lifetime warranty, installation videos and extended technical support hours
UCL offers a lifetime warranty on every component we manufacture. We don't expect you to use the warranty as we build our parts right the first time, so you won't need to replace things later on. If the product fails just let us know and we will immediately send you a replacement free of charge.
Getting your Caprice Extended Trailing Arms installed quickly and trouble free on your 71-96 B Body is important. For this reason, we include an installation DVD that shows step-by-step how to install your products. We also include a printed installation manual.
We want your installation to be effortless. That is why we have experienced technicians on staff extended hours to make sure everything goes smoothly. Our technicians work set business hours and are easily reachable via email, messaging and phone. To contact us, simply click "Contact Seller" and then click "Other" at the bottom of this page. You should see our number listed. You can also look us up online.
Recent Feedback
ikra3906
Excellent seller I buy items all the time. Fast shipping and no problems
*bandmngr*
Just as described. Rocket fast delivery .Great communication. AAAA++++
lunchbox51777
A++++++ Really Fast Shipment
Fitment Guide
Make
Model
Years
Buick
Electra
1971-1984
Buick
Roadmaster
1991-1996
Buick
Lesabre
1971-1985
Buick
Centurion
1971-1973
Buick
Estate
1971-1979
Buick
Lesabre Estate Wagon
1971-1990
Chevy
Caprice
1971-1996
Chevy
Impala
1971-1996
Chevy
Belair
1971-1981
Chevy
Biscayne
1971-1972
Chevy
Kingswood
1971-1972
Chevy
Townsman
1971-1972
Chevy
Brookwood
1971-1972
Oldsmobile
88
1971-1991
Oldsmobile
Delta 88
1971-1991
Oldsmobile
Custom Cruiser
1971-1992
Pontiac
Bonneville
1971-1981
Pontiac
Catalina
1971-1981
Pontiac
Safari
1971-1989
Pontiac
Parisienne
1977-1986
Pontiac
Grandville
1971-1976
Fast Shipping & Delivery
100% Money Back Guarantee
100% Satisfaction Guaranteed
Best Customer Service
Customer Whips
Customer vehicles with Universal Car Lifts kit installed. Want more info on which kit these cars are running?
Send Us a Message
On Ebay.
Featured Categories
eBay-Shop
About Us
Customer Rides
How to Install Car Lift Kits
Feedback
Contact Us
Add To Favorites
© Universal Car Lifts | All Rights Reserved.