3" Front and 2" Rear Leveling Kit Torsion Keys Fits Silverado Sierra 2500 HD

Description

PLEASE NOTE:
If your vehicle don't have 1'' stock(factory) block, it will provide additional 2'' lift.
But If your vehicle have 1'' stock(factory) block, our U bolts (appr. 10.24") may be short for you, you need remove your stock blocks
Does NOT fit Models with factory overload springs or Dually models
For 8 Lug Heavy Duty Models Only
Fits : (Please check your vehicle compatibility before buying)
3" Front and 2" Rear Leveling Kit Torsion Keys Fits Silverado Sierra 2500 HD
PLEASE NOTE
:
If your vehicle don't have 1'' stock(factory) block, it will provide additional 2'' lift.
But If your vehicle have 1'' stock(factory) block, our U bolts (
appr. 10.24"
) may
be short
for you, you need remove your stock blocks
Does NOT fit Models with factory overload springs or Dually models
For 8 Lug Heavy Duty Models Only
Fits :
(Please check your vehicle compatibility before buying)
2001-2010  Chevrolet Silverado 2500
2001-2010  Chevrolet Silverado 2500 HD
2007          Chevrolet Silverado 2500 HD Classic
2001-2007  Chevrolet Silverado 3500
2007          Chevrolet Silverado 3500 Classic
2007-2010  Chevrolet Silverado 3500 HD
1999-2004  GMC Sierra 2500
2001-2010  GMC Sierra 2500 HD
2007          GMC Sierra 2500 HD Classic
2001-2006  GMC Sierra 3500
2007          GMC Sierra 3500 Classic
2007-2010  GMC Sierra 3500 HD
WHAT IS A LEVELING KIT?
If you own a truck, you’ve probably noticed that the rear of the truck sits higher than the front. As a truck is built to haul heavy loads in the bed, the additional height in the rear is intentional so the truck doesn’t sag when extra weight is added. However, when you’re not hauling something, it might not be the most visually appealing. One easy way that you can fix this is with a leveling kit. A leveling kit allows you to raise the front of the truck a few inches to match with the back.
Kit Information:
Front 1-3" Adjustable Lift Forged Steel Torsion Keys
Front Powder Coated Shock Extenders
Rear 2" Cast Ductile Steel Tapered / Angled Lift Blocks
Rear Zinc Coated U-bolts w/ Hardware
Installing Torsion Bar Keys:
1. Block off your rear tires and make sure your vehicle is parked with the emergency brake on. Use a hydraulic jack (jacks from spare tire kits won’t be sufficient) and jack stands to lift your front two wheels off the ground. Refer to your owner’s manual for the correct jacking points to safely lift the vehicle. Support with jack stands on the frame of the vehicle – do not rely on the jack to hold the weight of the vehicle while you work.
2. You’re going to want to take the pressure off the suspension and torsion bars. You can use either a sturdy G clamp, like this one from X, or one of these torsion bar removal tools. Attach it to the cross member and tighten so that it presses on your torsion bar keys.
3. Remove the retaining plates by removing the adjusting bolts.
4. Remove your clamp or torsion bar removal tool.
5. Your torsion bar key may fall out easily at this point. Many times the keys can be stuck and will present a challenge to remove. At that point, a sledge hammer and PB Blaster will be your friend as it may take a bit of persuasion to remove the keys. In some extreme cases the keys may need to be cut free from the torsion bars with a torch. This should be left to professionals.
6. You may want to mark on the cross member the exact position to help put in the new key.
7. Once the old keys are out, you’ll be able to see that there’s a difference in angle between the old and new keys, which is how you’ll get the lift. Insert the new torsion bar key.
8. You’re basically going to work backwards now. Re-clamp the key and the cross member. Replace the retaining plates and secure with adjusting bolts.
9. Repeat steps 2-7 on the other side.
10. Make sure that all parts are securely tightened. Ensure all fasteners are tightened to OEM spec or the specs provided in the installation instructions for your kit.
11. Lower your vehicle back down to the ground.
Item Specifics
Manufacturer Part Number
BRA116843KE20
Condition
New
Brand
brakeautorparts_20
Interchange Part Number
Chevrolet Silverado 2500 HD 3500 HD 2001-2010 8 Lug Model
Other Part Number
GMC Sierra 2500 HD 3500 HD 2001-2010 8 Lug Model
Lift Height
3" Front & 2" Rear
Part Included
Lift Torsion Keys, Shock Extenders, Rear Blocks
Note
No instruction included
Front Lift
3 inch
Rear Lift
2 inch
Pay attention
Rear lift height vary depending on factory block
Color
Black
Material
Fabricated Steel
Placement on Vehicle
Front
Included Hardware
All Parts in pictures included
Warranty
1 Year
Kit or Single Part
Kit
Ship From
Ontario, California
Part Type
Suspension Lift Kit
Fitment Type
Direct Replacement
Return Policy
30 Days free
U-bolt Length
260mm (appr. 10.24")
Payment Policy
PayPal preferred.
Shipping & Handling Time
Shipping: Delivery Time is about 3-7 business days to most  of countries.
All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  2-7 business days.
Return Policy
Seller will be
responsible for return if there's any quality problem or wrong message provided in listing.
Be sure to check the compatible chart above, and be sure you have chosen the right item.
Warranty Policy
All of our brand new items come with a 60-Days money-back guarantee.
Contact Us
- Confused in confirming the compatibility about the item;
- Puzzled in how to install the item to your vehicle/car/truck/etc.；
We are always here to answer and reply.
Rotors & Pads
Brake Rotors
Brake Pads
Brake Calipers
Other Brake Parts
Shop Category
Store Home
Brake Caliper
Brake Calipers
Brake Calipers & Pads
Brake Calipers & Rotors & Pads
Brake Pad Sensors
Brake Pads
Brake Rotors
Brake Rotors & Pads
Brake Shoes
Leveling Lift Kit
Other
UTV & ATV Brake System Parts
◈  ATV Brake Master Cylinder
Wheel Hub Bearing
Wheel Hub Bearing Knuckle
Wheel Spacer
Hot Item
3" Front Leveling Lift Kit For Chevy Silverado GMC Sierra 1500 07-21 Lift 3 inch
USD 43.74
Front Wheel Bearing Hub Assembly Fits Buick Chevrolet Cadillac Pontiac Impala
USD 40.25
3" Rear Blocks Leveling Lift Kit Fits Chevy Silverado GMC Sierra 1500 1999-2019
USD 53.67
(2) Front Wheel Hub Bearing Assembly For Chevy Silverado 1500 Escalade Tahoe 4WD
USD 94.86
Front Wheel Hub Bearing Assembly For Chevy Silverado 1500 Escalade Tahoe 4X4
USD 53.29
New List Item
Front Wheel Bearing & Hub For Aguar S-Type Xj8 Xjr Xf 3.0L 4.0L 4.2L 5.0L 2WD
USD 55.56
Set For 2005 2006 2007 2008 2009-2016 Honda Odyssey 3.5L Rear Wheel Bearing Hub
USD 77.46
(2) For Subaru Ascent Forester Legacy Outback Wrx 2.4L Rear Wheel Bearing Hub
USD 84.22
1.5" Front and 1.5" Rear Leveling Kit Fits Ford F150 XLT 4WD 2004-2018 2014 2015
USD 62.38
2 Pcs Front Wheel Bearing Hub For Aguar S-Type Xj8 Xjr Xf 3.0L 4.0L 4.2L 2WD
USD 90.26
Picture
3" Front and 2" Rear Leveling Kit Torsion Keys Fits Silverado Sierra 2500 HD
PLEASE NOTE
:
If your vehicle don't have 1'' stock(factory) block, it will provide additional 2'' lift.
But If your vehicle have 1'' stock(factory) block, our U bolts (
appr. 10.24"
) may
be short
for you, you need remove your stock blocks
Does NOT fit Models with factory overload springs or Dually models
For 8 Lug Heavy Duty Models Only
Fits :
(Please check your vehicle compatibility before buying)
2001-2010  Chevrolet Silverado 2500
2001-2010  Chevrolet Silverado 2500 HD
2007          Chevrolet Silverado 2500 HD Classic
2001-2007  Chevrolet Silverado 3500
2007          Chevrolet Silverado 3500 Classic
2007-2010  Chevrolet Silverado 3500 HD
1999-2004  GMC Sierra 2500
2001-2010  GMC Sierra 2500 HD
2007          GMC Sierra 2500 HD Classic
2001-2006  GMC Sierra 3500
2007          GMC Sierra 3500 Classic
2007-2010  GMC Sierra 3500 HD
WHAT IS A LEVELING KIT?
If you own a truck, you’ve probably noticed that the rear of the truck sits higher than the front. As a truck is built to haul heavy loads in the bed, the additional height in the rear is intentional so the truck doesn’t sag when extra weight is added. However, when you’re not hauling something, it might not be the most visually appealing. One easy way that you can fix this is with a leveling kit. A leveling kit allows you to raise the front of the truck a few inches to match with the back.
Kit Information:
Front 1-3" Adjustable Lift Forged Steel Torsion Keys
Front Powder Coated Shock Extenders
Rear 2" Cast Ductile Steel Tapered / Angled Lift Blocks
Rear Zinc Coated U-bolts w/ Hardware
Installing Torsion Bar Keys:
1. Block off your rear tires and make sure your vehicle is parked with the emergency brake on. Use a hydraulic jack (jacks from spare tire kits won’t be sufficient) and jack stands to lift your front two wheels off the ground. Refer to your owner’s manual for the correct jacking points to safely lift the vehicle. Support with jack stands on the frame of the vehicle – do not rely on the jack to hold the weight of the vehicle while you work.
2. You’re going to want to take the pressure off the suspension and torsion bars. You can use either a sturdy G clamp, like this one from X, or one of these torsion bar removal tools. Attach it to the cross member and tighten so that it presses on your torsion bar keys.
3. Remove the retaining plates by removing the adjusting bolts.
4. Remove your clamp or torsion bar removal tool.
5. Your torsion bar key may fall out easily at this point. Many times the keys can be stuck and will present a challenge to remove. At that point, a sledge hammer and PB Blaster will be your friend as it may take a bit of persuasion to remove the keys. In some extreme cases the keys may need to be cut free from the torsion bars with a torch. This should be left to professionals.
6. You may want to mark on the cross member the exact position to help put in the new key.
7. Once the old keys are out, you’ll be able to see that there’s a difference in angle between the old and new keys, which is how you’ll get the lift. Insert the new torsion bar key.
8. You’re basically going to work backwards now. Re-clamp the key and the cross member. Replace the retaining plates and secure with adjusting bolts.
9. Repeat steps 2-7 on the other side.
10. Make sure that all parts are securely tightened. Ensure all fasteners are tightened to OEM spec or the specs provided in the installation instructions for your kit.
11. Lower your vehicle back down to the ground.
Item Specifics
Manufacturer Part Number :
BRA116843KE20
Condition :
New
Brand :
brakeautorparts_20
Interchange Part Number :
Chevrolet Silverado 2500 HD 3500 HD 2001-2010 8 Lug Model
Other Part Number :
GMC Sierra 2500 HD 3500 HD 2001-2010 8 Lug Model
Lift Height :
3" Front & 2" Rear
Part Included :
Lift Torsion Keys, Shock Extenders, Rear Blocks
Note :
No instruction included
Front Lift :
3 inch
Rear Lift :
2 inch
Pay attention :
Rear lift height vary depending on factory block
Color :
Black
Material :
Fabricated Steel
Placement on Vehicle :
Front
Included Hardware :
All Parts in pictures included
Warranty :
1 Year
Kit or Single Part :
Kit
Ship From :
Ontario, California
Part Type :
Suspension Lift Kit
Fitment Type :
Direct Replacement
Return Policy :
30 Days free
U-bolt Length :
260mm (appr. 10.24")
Payment Policy
PayPal preferred.
Shipping & Handling Time
Shipping: Delivery Time is about 3-7 business days to most  of countries.
All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  2-7 business days.
Return Policy
Seller will be
responsible for return if there's any quality problem or wrong message provided in listing.
Be sure to check the compatible chart above, and be sure you have chosen the right item.
Warranty Policy
All of our brand new items come with a 60-Days money-back guarantee.
Contact Us
- Confused in confirming the compatibility about the item;
- Puzzled in how to install the item to your vehicle/car/truck/etc.；
We are always here to answer and reply.