09-13 Ram 2500 3500 Gas 4WD Upper & Lower Control Arm For 3.5-5" Lift Kit

Description

Brand New Upper & Lower Control Arm For 3.5-5" Lift Kit
Description
These control arms are made from carbon steel with polyurethane bushings. Eliminate wheel hop, steering wander and increase traction with an easy bolt on installation. 100% TIG welded for the ultimate in strength and appearance. These control arms are built with an offset to provide maximum tire clearance. When running larger tires they can rub against the stock control arms at full steering lock, our offset design eliminates this problem. You must to have these when you lift the vehicle 2" or more!
Package Content
Front Upper Control Arms x2
Front Lower Control Arms x2
Digital Installation Guide x1
Installation time is approximately 1-2 hours
Tire Fitment
Compatible Vehicles
Dodge Ram 2500 2009-2013 4WD Gasoline
Dodge Ram 3500 2009-2012 4WD Gasoline
Warranty
Lifetime Warranty against any material or workmanship defect, please contact us first if there is an issue
Lifting Guide
Determine your lift kit requirements based off current stock heights (displayed in green) for both front and rear by measuring from the ground to the bottom of your vehicle's flare.
Level to Stock
Level to your stock rear measurements by adding appropriate lift to the front of your vehicle.
Stock Lifting
Add to both front and rear equally to gain lift while retaining the stock appearance.
Leveling Lift
Achieve a leveled lift by adding to both front and rear while accounting for the stock difference.
Service Guarantee
We offer
Same day handling
on all orders paid before 2pm Pacific Standard Time.
Free Priority 1-5 Day shipping.
All items purchased hold a
60 day satisfaction guarantee
or your money back.
Free Return if for any reason you are not satisfy with the item.
Please Be Advised
Delivery will use supplied address - any changes made may result in a delay in shipment.
Vehicle fitment is in accordance with American models; international models may differ and affect proper fitment requirements.
Buy MUST contact seller before ordering with any fitment questions. Requests for fitment checks made in order notes will not be satisfied.
Also Available
Front Lift Kit
Rear Lift w/ Overload
Sway Bar Drop
2" Lift
2.5" Lift
3" Lift
3.5" Lift
4" Lift
4.5" Lift
5" Lift
1" Lift
1.5" Lift
2" Lift
2.5" Lift
3" Lift
Recommended For 2-5"
Track Bar
Sway Bar End Link
Pitman Arm
2-3" Lift
3.5-5.5" Lift
Recommended For 0-6"
Recommended For 3-6"
Upper+Lower Control Arm
Panhard Track Bar
Steering Gear Box Stabilzer
Recommended For 2-3"
Recommended For 3.5-5"
Recommended For 0-4"
Recommended For 0-6"
Bump Stop
Driveshaft Shim Carrier Bearing Drop
Recommended For 2-4" Lift
Recommended For 2-4" Lift